Is 448 kbps 1080 or 720
If you place a call from the H323 side and target a SIP endpoint, same applies, but the IWF function will send ACK to 200 OK with SDP and set the same "m" line for video to 1920 k vice 6000 k as requested.
#Is 448 kbps 1080 or 720 1080p
So when this call connects, one side will only get around 1800 k or so of BW for video and without changing the settings on the codec like Vivek has indicated, you won't be able to achieve 1080p on this leg of the call, while the H323 side most certainly will. Once the call connects and terminal capability sets are exchanged, the IWF function will formulate a response back to the SIP side of the call. The H323 side of this call is also requesting and has been approved to run at 6 Meg also. IWF Function will look for the H323 Side of the call and allow it to connect. If you place a SIP call targetting an H323 System, the initial INVITE on the SIP side will contain total session BW and transport independent BW. The issue still is this CDETS quoted to you. Please let me know whether provided information helped or not. This command will help to achieve 1080p calll, if we have optimal defination set to High and when you have bandwidth more then 1472 Kbps XConfiguration Video Input Source 1 OptimalDefinition Profile: High XConfiguration Video Input Source 1 OptimalDefinition Threshold60fps: Never Never: Do not set a threshold for transmitting 60fps. So for all resolutions lower than this, the maximum transmitted framerate would be 30fps, whileĪbove this resolution 60fps would also be possible, if the available bandwidth is adequate. XConfiguration Video Input Source o p timalDefinition Threshold60fpsįor each video input, this setting tells the system the lowest resolution where it should transmit 60fps. It look like we have something to do with 60 fbps as well, so i recommend one more setting to change i.e. I agree with Patrick, according to following table